Parametric EQs for Taming Sweet Spot of Monitors

After room treatment, parametrics have been brought up to correct the sweet spot response of nearfields. Parametrics used for this purpose were mentioned as being less of a problem with phase & time delay(s) when used for this purpose. NOT looking to tune the room, but to correct mild eq response of the monitors direct response using rta mic w/ visual output.



I want to place the parametrics between my interface and 2 powered L&R monitors and powered sub. Later I plan to upgrade to using 2 powered subs to get true stereo sub output despite the rec on just using one as I plan to use a lot of restraint with the bass when using the set-up. So, this may mean 4x parametrics, 2x dual channel models, or an all in one itb unit (digital?).



Do not really want anything used...... In that case KT DN410 was recommended as a good parametric in several other threads. Is there any say $200 max (per channel) units available new?



Also I really want an external unit dedicated for this purpose.



Since I need 2 way function, another option may be;

Dbx driverack, behringer unit, or XTA units were recommended although the XTA's I found are a bit pricey @ a couple thousand bux.



The Room guys on here seem to bring up decent behringer parametric units, what units specifically are they referring to? Digital Behringer parametric units?



Thanx

Parametric EQs for Taming Sweet Spot of Monitors