Hey! Also posted this to the less active "newbie production" forum, reposting here to broaden the insight i'm hoping for.
So i'm fortunate enough to be able to plug my live rig directly into my interface and use cab IR's to get my live flavour silently. I love it!
My current rig goes:
Guitar> OD (currently set on my mxr custom badass) > THD Univalve> Quilter Tone Block> Steinberg UR22 interface. All of the becessery line leveling options and dummy load components are there and personally approved by the amp manufacturers to work well in a no mic necessary situation.
So i'm starting to reamp! Just picked up a Radial X-Amp Reamper (the dual channel active guy) and am running into issues.
The problem: i can't seem to get my dry DI signal routed to the reamp box for some reason. On the Steinberg UR22 you are limited to 2 TRS balanced line outs, usually used to hook up your studio monitors. I use headphones, so those outs are free to rout to a reamper. In Reaper, i go to my dry track channel, and set my hardware output to 1/L which is the out that utilizes a 1/4" to XLR cable to hook into the reamper. Then that hooks to my rig, which is sent back into input 1 on my mixer, the reamping setup. What am i missing? Obviously XLR and TRS yield differences but i feel like i should be getting some signal at least to the reamper. The reamper has a clipping light that doesn't flare up at all, and when i drive the gain on the reamper i get mad feedback. I can hear my amps hum in the channel i am trying to reamp, so i know it's ready to receive signal. Also, by using the DI track's send to hardware out 1/L will just let me head the dry track in my left ear. I'm sure i'm missing something in my DAW.
Sorry for the read, trying ti be as elaborate as i can. Thanks in advance for your time, if we get this going i'll post some thrashy jams
So i'm fortunate enough to be able to plug my live rig directly into my interface and use cab IR's to get my live flavour silently. I love it!
My current rig goes:
Guitar> OD (currently set on my mxr custom badass) > THD Univalve> Quilter Tone Block> Steinberg UR22 interface. All of the becessery line leveling options and dummy load components are there and personally approved by the amp manufacturers to work well in a no mic necessary situation.
So i'm starting to reamp! Just picked up a Radial X-Amp Reamper (the dual channel active guy) and am running into issues.
The problem: i can't seem to get my dry DI signal routed to the reamp box for some reason. On the Steinberg UR22 you are limited to 2 TRS balanced line outs, usually used to hook up your studio monitors. I use headphones, so those outs are free to rout to a reamper. In Reaper, i go to my dry track channel, and set my hardware output to 1/L which is the out that utilizes a 1/4" to XLR cable to hook into the reamper. Then that hooks to my rig, which is sent back into input 1 on my mixer, the reamping setup. What am i missing? Obviously XLR and TRS yield differences but i feel like i should be getting some signal at least to the reamper. The reamper has a clipping light that doesn't flare up at all, and when i drive the gain on the reamper i get mad feedback. I can hear my amps hum in the channel i am trying to reamp, so i know it's ready to receive signal. Also, by using the DI track's send to hardware out 1/L will just let me head the dry track in my left ear. I'm sure i'm missing something in my DAW.
Sorry for the read, trying ti be as elaborate as i can. Thanks in advance for your time, if we get this going i'll post some thrashy jams
Reamping Issues
Aucun commentaire:
Enregistrer un commentaire